Top 10 Fuel Pressure Tester UK – Fuel Pressure Testers

As an Amazon Associate I earn from qualifying purchases.



EVIL ENERGY 6AN Male Flare to -6 Female Swivel with 1/8 NPT Gauge Port Fuel Pressure Take Off Fitting Adapter Aluminum 2Pcs

EVIL ENERGY #ad - Any problem you might have, please feel free to contact us via Amazon message. Material: made of 6061-T6 aluminium alloy.

Sealing: the an thread of the flare is sealed by a 37 degree angle and the NPT is sealed with a 60 degree tapered. It is highly recommended to use sealant or PTFE polytetrafluoroethylene tape at the NPT port. Max working pressure: 4000psi, working temperature: -76°F to 572°F. Evil energy provide 6an fuel pressure gauge fitting 3-month warranty. Fuel pressure take off fitting: an6 male to -6 female with 1/8" NPT Gauge/Gage Port, the thread size of the 6AN is 9/16-18UNF.
ManufacturerSpeedwow Tuning #ad
Part NumberEV01842AN6-2



ATV, FXTUL Automotive EVAP Smoke Machine Fuel Leak Detector Leak Down Tester with Dual-Modes 12V Car Pipe Vacuum Leakage Tester for All Cars, Motorcycles, Snowmobiles, Light Trucks

FXTUL #ad - The smoke machine isn’t equipped with value code wrench and EVAP special connector. Professional automobile smoke leak detection tool, the smoke detector built-in air pump and smoke generator, using visible smoke to quickly locate the leak hole. Please repair the leakage.

Two-modeair mode and smoke mode, so it does not rely on additional air machine. The device can also work normally at -20℃. Multiple test functionsthe smoke machine automotive leak detector supported crankcase system test, various pipe fittings test, exhaust system test, intake system test, car sealing test, fuel tank system test, turbo leaks test, EVAP system test. The smoke can be produced within 30 seconds, dramatically reducing diagnostic time. Note: not applicable to air conditioning system piping.

When the temperature of the device exceeds 75℃, power protection will be intelligently activated to turn it off. Connects fuel pipe leak detector to the car's EVAP access port, including auto, then produce smoke. Intelligent protectionautomotive leak detection machine has an intelligent protection device. Evap system supportedit works on the evap system, off-road, atv, it can help you apply with evap system of all vehicles, light trucks & speedboats. Perfect for Mobile Automotive Repair!
BrandFXTUL #ad
ManufacturerFXTUL #ad
Part NumberFMHS

3. OTC


OTC 5609 Cylinder Leakage Tester Kit, black

OTC #ad - Includes detailed instruction chart. Rugged, blow molded storage case with removable lid keeps components organized and protected when not in use. Otc's cylinder leakage tester kit quickly diagnoses internal engine problems like bad rings, valves, and leaking head gaskets and comes complete with adapters for most applications. Dual 2-1/2 inch gauges read 0-100 psi and 0-700 kPa and feature chrome bezels and rugged protective outer boots. Kit features a pressure regulated manifold with quick couplers, 24 inch long 14mm flex hose, and 10 mm, 12 mm, and 18 mm thread adapters.
BrandOTC #ad
ManufacturerOTC #ad
Part Number5609

4. OTC


OTC 5606 Compression Tester Kit for Gasoline Engines

OTC #ad - Corrosion resistant nickel-plated finish protects metal components; rugged blow-molded hard case with removable lid keeps components contained and organized when not in use.

Extra long 25 inch flex hose gauge assembly with quick coupler allows easy viewing out of cluttered engine compartments. Otc's compression tester kit is ideal for use on all types of gasoline engines including domestic, import, marine, motorcycle, and small engines. Professional quality, rugged protective outer boot, dual scale 2-1/2 inch diameter gauge reads 0-300 psi and 0-2100 kPa and features a chrome bezel, and zero adjust feature. Includes: 12-inch flex 14mm standard, 12-inch flex 14mm long reach, 12mm, and 10mm, and 18mm thread adapters - adapters work on both flat and tapered seat plugs.
BrandOTC #ad
ManufacturerOTC Tools #ad
Part Number5606

5. Lisle


Lisle 55700 Master Fuel Injection Test Set

Lisle #ad - Tests gm, honda/acura, chrysler, toyota, ford, Bosch CIS and L-Jetronic. Comes with a variety of adapters and gauges for checking many types of systems. Adapts to work with test port connections, end of hose connections and in-line connections. Set checks fuel pressure on most Port Fuel Injection PFI and Throttle Body Injection TBI systems. List of component parts included with instructions.
BrandLisle #ad
ManufacturerLisle #ad
Height10.16 cm (4 Inches)
Length44.45 cm (17.5 Inches)
Width29.21 cm (11.5 Inches)
Part Number55700



BETOOLL HW0130 8pcs Petrol Engine Cylinder Compression Tester Kit Automotive Tool Gauge

BETOOLL #ad - Includes 17. 7" extension hose with 4 sizes 10mm, suitable for petrol engines on motorcycles, trucks, 12mm, 18mm selectable brass adapters, cars, 14mm, ATVs and more.3" gauge features dual color scale for easy reading. No need to thread into head. Kits includes 2 rubber Cones Ends for quick check. Easy pressure release Button On Side Of Tester. Pressure range: 0-300psi, 0-20bar. Checking compression On Petrol Engine Quickly And Accurately.
BrandBETOOLL #ad
ManufacturerSZBRT #ad
Part NumberBRT-14-130

7. Rev X SUPER-TESTER Ethanol Test Kit


Rev X SUPER-TESTER Ethanol Test Kit

Rev X SUPER-TESTER Ethanol Test Kit #ad - Mandatory for the marine gasoline. Extremely economical tool. Bold, easy to read increments. Also tests pure or straight alcohols for moisture content. Extremely simple to use. Can be reused on new samples for years. Full size, easy to hold bottle. Displays percentage of alcohol/water concentration. For use with all gasoline. Test bottle impervious to alcohols and gasoline.
BrandRev X SUPER-TESTER Ethanol Test Kit #ad
ManufacturerRev-X #ad
Part NumberST0501

8. HFS


HFS R Carburetor Carb Valve Fuel Pump Pressure & Vacuum Tester Gauge Test Kit

HFS #ad - Comes with large 3-1/2. Product instructions and carrying case included. Read engine vacuum to 28. Adapters suitable for most vehicles. Test fuel pump output pressure to 10PSI.
BrandHFS #ad
ManufacturerHardware Factory Store #ad
Height19.05 cm (7.5 Inches)
Length29.21 cm (11.5 Inches)
Width5.08 cm (2 Inches)
Part Number11902

9. Alltrade


948004, Powerbuilt 10 Pc. Bearing and Race Installer Kit

Alltrade #ad - Separates fittings on automotive fluid lines, oil and transmission lines. Works on most late model GM, including AC, fuel, Ford and Chrysler vehicles. Includes 1 piece driver handle. Includes 9 discs. International products have separate terms, are sold from abroad and may differ from local products, including fit, and language of product, age ratings, labeling or instructions. 9pc adaptors - size;1. 565", 2. 47", 2. 31", 2. 83", 2. 555", 1. 75", 2. 995", 1. 965", 3. 18". Tool solutions for most all situations. Built to exceed tool standards.
BrandAlltrade #ad
ManufacturerAlltrade Tools, LLC #ad
Part Number948004

10. Abn


ABN Car Vacuum and Fuel Pump Tester Gauge Kit – Fuel Pump Pressure & Vacuum, Carburetor Intake Manifold, Vacuum Test

Abn #ad - Diagnose your vehicle: the abn car vacuum and fuel pump tester gauge kit – fuel pump pressure & vacuum, carburetor Intake Manifold, & Vacuum Test enables testing of the fuel delivery pressure to the engine to check for worn or defective parts in fuel pumps and vacuum systems; Set includes a variety of adapters suitable for most vehicles; Intended for carburetor engines with a mechanical fuel pump operating pressures below 10 PSI 07 bar.

Easy storage: heavy-duty 12. 75” x 2. 25” x 7. 25” inch 32. 4cm x 5. 7cm x 18. 4cm plastic blow-molded carrying case with handle for easy transportation, safe storage, and quick organization. Easy to use: assembly and operating instruction manual included; pressure gauge has a 4-inch 102cm diameter with color-coded measurement scales so it is easy to read and a 1. 2-inch 3cm thickness with rubber side notches for easy grip; Extra-long rubber hose and 14mm/18mm manifold adapter; Rubber hose 40 PSI 2.

8 bar maximum working pressure; pressure gauge 0-28 IN-Hg 0-70 cm-HG vacuum and 0-10 PSIG 0-07 kg/cm² pressure. Package contents: package includes 1 vacuum pressure gauge, 1 1/8”-27 female to 3/8” male brass adapter, 1 brass cone adapter, 1 1/8”-27 male to 7/32” barbed brass fitting adapter, 1 plastic connector, 1 1/4”x18 male to 1/8”-27 female brass adapter, 1 carrying case, 1 t-type 7/32” barded brass fitting adapter, 1 2-foot 61cm long rubber hose – 13/64-inch ID 23/64-inch OD, and 1 instruction manual for your convenience.
BrandAbn #ad
ManufacturerABN #ad
Weight0.75 kg (1.65 Pounds)
Part Number2190