Top 10 Mobile Phone Holder for Cars UK – Mobile Phone Automobile Cradles

As an Amazon Associate I earn from qualifying purchases.

1. Mpow

Universal Car Cradle with One Button Release&Strong Sticky Gel Pad for iPhone 11 Pro Max 11 Pro XS Max XS Xr X 8 7 Plus, HTC, Car Phone Holder, Galaxy, Mpow Dashboard Windscreen Car Phone Mount, etc

Mpow - Seller suggestions:once the product is fixed, prevent air from entering the suction cup. Note: we do not recommend to apply the dashboard car mount on leather, wall or filmed glass surfaces as the suction cup is designed with strong viscosity and attraction; when you rinsing and air drying the suction cup please use the car phone holder after 24 hours.

Remove easily by pulling the suction pad without leaving any nasty mark on your dash. Wash and air dry to regain Stickiness. Silicone padded clamp: in order to better protect the mobile phone and avoid the direct friction between the mobile phone and the bracket, Alcatel, Htc One, Google Nexus Pixel, Galaxys10/S9/S8/S7/S6/9/8/7, LG, we use silica gel pad as the connection. With one button release clamp, you can put and remove your phone effortlessly, safeguarding the Safety of taking a call. One-hand operation: mpow dashboard phone mount can not only keep your phone on the dashboard.

With its 2-section adjustable arms, enjoy hands free calls while driving, providing you an open and clear sight for safe driving, The phone holder can lean down beneath your dashboard, press the release button to open the clamp and set the phone. If you have to move, keep good sealing, Exhaust the air, please press the suction cup base first, try not to move, and then adjust the gear. All installation is just in seconds. Tip: sprinkle a little water in the place where the sucker is fixed, and the fixity is better. Note:remove the dust film from the bottom of the bracket before installing the car phone holder mount.
Height13 cm (5.12 Inches)
Length8 cm (3.15 Inches)
Width8.51 cm (3.35 Inches)
Part NumberMPCA032EB-DE

2. Mpow

Galaxy S20/S10/S9/S8 and More, Universal Air Vent Car Phone Mount with One Button Release and Dual-sized Clip for iPhone 12/Pro Max/12 Mini/SE/11 Pro/11/XS Max/XS/XR/X/8/7, Mpow Car Phone Holder

Mpow - The upgraded square arms increase the contact area with the phone and enhance the stability of clamping. Dual-sized clip & square arms: the cross air vent clip features internal high-quality manganese steel and external TPU material, arc-shaped, which can be stably fixed on most horizontal and vertical air vent blades.

Widely compatible: mpow air vent car mount is widely compatible with 4. 7"-6. 5" smartphones, sony, pixel, nokia, galaxy s10/ s10+/ s10e/ note 9/ s9/ s9+, lg, such as iphone iphone 12/ pro max/ 12 Mini/11/ 11 Pro/ X/ XS/ XS Max / X/ 8 / 8plus / 7plus / SE/ 6s/ 6plus, nexus, Blackview, and More. Easy installation and removal: there is a button on the back of the Mpow air vent mount. At the same time, the mpow air vent car phone holder will not block the sight, ensuring the safety of driving. Note: mpowair vent phone holder may not be suitable for non-intensive, or retraction type vents.

360° rotatable: the ball joint of the mpow air vent car phone mount allows you to adjust the phone 360° until you find the most comfortable angle. You can mount or dismount the phone by simply pressing the button, and then squeeze the arms with one hand to fix the phone. Convenient charging: the support feet of the mpow air vent cell phone holder leave enough space for you to charge, so you don't have to worry about the low battery warning that will affect the normal use of the phone while driving.
Height7 cm (2.76 Inches)
Length10.5 cm (4.13 Inches)
Width8.5 cm (3.35 Inches)
Part NumberMPCA040BB

3. Mpow

Galaxy S10/S9 Note LG,etc, Car Phone Holder , Mpow Windscreen Car Mount Grip Flex Universal Long Arm Windshield Car Cradle with Extra Dashboard Base for iPhone11 ProMax/11Pro/11/Xs Max/Xs/Xr/X/8/7

Mpow - Dashboard base design:extra dashboard support base with sponge, act as a fulcrum, offers extra stability and security. Our car mount will double secure your smartphone and other devices, act as a fulcrum, allowing you a non-distraction drive.

Dashboard base design: extra dashboard support base, that have extra sponge dashboard base offers extra stability and security. Latest gooseneck design:up to 13 inches in total length from holder back to suction cup that Easily Push Gadgets to Your Face. Long flexible arm allows for easy positioning, and brings the phone closer to the driver so you can keep your eyes on the road instead of looking down at your phone. Wide compatibility: securely holds most smartphones, sony, galaxy, and works with most cases.

Including iphone, htc, LG and other smartphones between 2inch and 4. 25inch in width. 360 degree rotation: one-touch mounting system locks release to installation with strong suction cup, 360 Degree Rotation with Multi-Adust Good Viewing Angel of Your Phone. Make sure that you can keep your eyes on the road instead of fumbling around with your smartphone, trying to find a less than ideal position.
Height6 cm (2.36 Inches)
Length20 cm (7.87 Inches)
Weight0.18 kg (0.39 Pounds)
Width9 cm (3.54 Inches)
Part NumberMPCA033BB

4. Beikell

Phone Holder for Car with One Button Release and Strong Sticky Gel Pad for Mobile Phones from 4.7 to 6.5 inches, Beikell Car Phone Holder, Adjustable Car Phone Mount Cradle 360° Rotation

Beikell - Versatile viewing: - highly-flexible ball-joint 360° rotation provides infinite viewing angles. Position your phone at the perfect angle to enjoy a more relaxed and safer drive. Extendable arm: - the telescopic arm can extend to your desire length and pivot up or down for optimal viewing.

Durable and full protection: the heat resistant PC material makes our phone holder more stable than other supports on the market. Remove easily by pulling the suction pad without leaving any nasty mark. The silicone arms of the holder protect your phone from scratches and prevent it from falling while driving.

Preventing from blocking your view while driving. Secure stable install: - extra strong suction cup with super sticky gel pad sticks securely on the dashboard or most flat surfaces. Convenient lock and release: - One-button release system enable you to lock or release your phone with just one hand operation.
Height6.5 cm (2.56 Inches)
Length13 cm (5.12 Inches)
Weight0.03 kg (0.07 Pounds)
Width8.5 cm (3.35 Inches)
Part NumberB6007

5. Autkors

Air Vent Car Phone Mount 360 Degrees Rotation Auto Lock Cell Phone Cradle Compatible for Mobile Phones from 4.7 to 6.5 inches., Autkors Car Phone Holder

Autkors - Stable design: this holder will keep your phone stable and prevent it from falling off or shaking with triangle look design. Once assembled, you can change the orientation of the holder with just one hand to drive safely. Freely adjustable: the ball head of the holder can be freely rotated 360 degrees and adjusted 45 degrees up and down.

The ball head and knob are made of non-slip material for added comfort. Wide compatibility: the side clamps are suitable for 62 to 80 mm mobile phones and are suitable for most smartphones and gps devices for a stable grip. The holder is suitable for mobile phones from 4. 7 to 6. 5 inches such as galaxy s10 / 6plus / s8 / 7 / P10 / 8 / S7, Phone 11.11 pro, 11 pro max, x / mate20 / s9 / 7plus / 8plus / 6, huawei p20 / xs / 6s / mate10, LG, Sony, Google Pixel etc. Super stable and durable. Unimpeded charging port: there is a charging port at the bottom of the holder, which allows you to connect the mobile phone to the charging line or audio line.

This triangular phone mount is stable, durable and flexible to meet the needs of all drivers. Non-slip and high-quality: the clamps of the car holder are made of aluminum alloy, the back plate of non-slip material and there is no risk of scratching. There is a charging port at the bottom of the stand that allows you to connect your phone to the charging cable or audio cable without removing the phone from the stand.
Height8.2 cm (3.23 Inches)
Length10.9 cm (4.29 Inches)
Weight0.05 kg (0.12 Pounds)
Width8.1 cm (3.19 Inches)
Part NumberA8750


YOSH Car Phone Mount Holder Magnetic Air Vent in car Mobile Phone Cradle Magnet for iPhone 12 11 Pro Max XR XS Max X 8 7 6s Plus Samsung S20 S10+ A70 S10 Huawei P30 P20 Pro Xperia Xiaomi Oneplus etc.

YOSH - Exquisite design small size 40mm-dimension makes YOSH Magnetic Car Phone Mount hardly noticeable while not being used, and will not block your view when driving. Powerful magnetism the four n50 magnets inside yosh car phone holder provide strong magnetic force, Aonerex, so that YOSH magnetic car phone holder can securely hold your phone or GPS devices like Freelligent, regardless of road vibrations or impacts.

Anti-scratch rubber soft rubber silicon type: 50D protects both your air vent and phone from scratches. One-hand operation using yosh car phone holder, you can simply attach or remove your phone with one hand. Wide compatibility yosh smartphone car holder is compatible with cars with horizontal vents such as renault Citroën, Huawei, HTC, VW Bmw, Peugeot, Samsung, Nokia, and for smartphones like iPhone, Motorola, LG, Nexus, Xiaomi, Oneplus, Audi and Skoda and etc.

Oppo, wiko, gps and MP3 music players. It’s also very convenient for you to adjust the angle of your device. Equipped with superior heat resistance protects YOSH magnetic phone holder from deformation.
Height3.7 cm (1.46 Inches)
Length4.5 cm (1.77 Inches)
Weight0.04 kg (0.08 Pounds)
Width4.5 cm (1.77 Inches)
Part NumberYS-JP-CZ-001-1P
WarrantyWarranty & Support: YOSH provides an 18-Month Warranty for all of our products.


VANMASS Car Phone Holder 3 in 1 for Car Dashboard Windscreen Air Vent Compatible with All iPhone

VANMASS - Safe driving & no block in sight: flexible neck for the most ideal view when talking, listening to music or charging, no glance down from time to time. 2extra sticky dash pad for perfect mounting. Compatible with mobile phones between 4''-7'' with most case like otterbox/battery/wallet case.

4the materials adopted can overcome -40~90℃ extreme environments. One-hand operation, user-friendly: just press button on the backside to open the clamp arms smoothly and silently, then put your phone in and squeeze the clamp arms to hold your phone firmly without close onto the side buttons. 3suction cup can be renewed by rinsing. Upgraded third version 3-in-1: applied on dashboard/air vent/windscreen with the super strong sticky suction cup & steel-cored air vent clip.

Focus on details: 1silicone rubber pad protects phone from scratching. Adjustable telescopic arm from 5. 26" to 9. 81", navigating, plus pivoted on 270° for best viewing angle. True all-around protection: adopt shock-absorbing faux carbon fiber on the cradle, scratching, more fitting solid silicone rubber on the 2-side clamps & holding feet to effectively avoid bumping, flying out and abnormal noise on your cell phone at all times.
Height14.73 cm (5.8 Inches)
Length8.89 cm (3.5 Inches)
Width7.62 cm (3 Inches)
Part NumberNR-4XEW-11RY
ModelCTVK13 UK


VICSEED Car Phone Holder Thick Case & Big Phones Friendly Quick Release Mobile Phone Holders for Cars Dashboard Windshield Air Vent 360°Rotation Long Arm Strong Suction Fit with iPhone11Pro/11,etc

VICSEED - One-hand operation& multiple viewing anglewith quick release button the phone can be easy to inserted and quick Released with one hand. Such as dashboard, including trucks, SUV BMW, pickup trucks, etc. Universal car phone holderbesides the bracket and suction cup mount, windscreen, air vent clip is an extra gift for you fits all air vents with horizontal or vertical vent blades.

Fully adjustable with 360 degree rotation for changing your perspective with a simple Spin;. It can be mounted easily on a variety of locations and surfaces. The telescopic arm that extends from 4. 92\" - 9. 84\" and can pivot up or down for a variety of angles which optimizes viewing capabilities.

Fit all size phone & most caseour universal mobile phone holder for all iphone and android phones with and without a phone case otterbox/battery/wallet/ring case, such as iPhone 11 Pro Max / Note 8 / 11 / S9 / S9 + / 11 Pro / 8Plus, HTC, google, etc. Huawei, samsung galaxy note10 / s8 + / s10e / note 5 / s10 / s10 + / xr / xs / 8 / S8, LG, and other cell phones. Perfect phone holder for all cars, air vent, taxis, etc;.
Height9.9 cm (3.9 Inches)
Length12 cm (4.72 Inches)
Weight0.2 kg (0.44 Pounds)
Width8.1 cm (3.19 Inches)
Part NumberCTEZ11
WarrantyVICSEED offers a warranty for 36-month from date of purchase.


Huawei,Sony, 3 in 1 Phone Mount 360° Rotation Car Cradle for Windshield Dashboard Air Vent, Galaxy S20/S10/S9/S8, AIKELA Car Phone Holder, One-touch Release for iPhone11Pro/11/XS Max/XS/XR/X/8Plus/7

AIKELA - What you getthe package includes suction base*1, phone cradle*1, air vent clip*1, user manual*1. Can be mounted on dashboard, windshield or air vent firmly. Fit for most cars, taxis. Fit for all size phoneadjustable bracket can hold almost all size phones width from 2.

16in to 3. 74in and most phone case such as phone 11 pro, xs max, 8, and other cellphones, 6, Huawei, XR, 7, Samsung S10 S9 S8 S7 S6, X, GPS Device. One-touch design, 360°rotationno tools needed. A big back rest and the release button placed on the back, for a very smooth opening of the side arms. Updated material qualityreliable materials and structure provide 3 times durability than ordinary car mount, ensures much longer lifetime and more stable for holding your cell phone.

3 in 1 car mount besides the bracket and suction cup mount, pickup trucks, SUV, trucks, air vent clip is an extra gift for you fits all air vents with horizontal or vertical vent blades. And the 360 degree rotation ball head for easy adjustment to getting perfect viewing. Just 5 seconds to put your phone and keep tight.
Height7.19 cm (2.83 Inches)
Length12.73 cm (5.01 Inches)
Width8.69 cm (3.42 Inches)
Part NumberH115

10. Mpow

Car Phone Holder, Mpow No Obstruction View Dashboard Car Phone Mount with Sticky Gel Suction Cup,Dual Release Button, Galaxy Note 20 S20 S10 and More, Compatible with iPhone SE 11 Pro Max XS XR X 8 7

Mpow - No obstruction and better view: the car phone holder arm is adjustable to keep the phone below your dashboard; the car phone mount is rotatable for an ideal viewing angle, so you can drive home safely. The feet at the bottom are designed to be adjustable to hold phone models of various sizes and enhance stability.

The arm can pivot up or down 140 degrees for a variety of viewing angles. Multiple viewing angles: the car phone mount for dashboard is also innovative as it has a security lock that can provide fast angle adjustment and anti-shake protection. Easy mount and set up: quick release button allows one hand operation of installing or removing the phone. The car phone holder has 2 release buttons for easy operation with left and right hands. Wide compatibility: fits most phones and cases, even with an otterbox case, holds phones with 4.

0-6. 9" displays and up to 103mm/4. 1in wide, including but not limited to iphone se 2020/11/11 pro/11 pro Max/XS/XR; Galaxy Note 20/Note 20 Ultra/S20 Ultra/S20+/S20 Strong suction and sturdy: the suction cup has a coating of sticky gel that prevents air gaps from forming. This way, the dashboard car phone mount stays in place even as you drive over bumpy roads. If the gel loses its grip, just rinse it with water and let it air dry to stick like.
Part NumberMPCA162AB-UK