Top 7 Hydraulic Puller Set UK – Car Tools & Equipment

As an Amazon Associate I earn from qualifying purchases.

1. Auto Tools Direct

Auto Tools Direct 10 Ton Hydraulic Gear Puller Set AU274

Auto Tools Direct - Ram capacity: 1-1/2" Diameter at 10 Ton. Puller legs/jaws size: 8"3pc, 6"3pc, 4" 3pc. 1 twin head adapter, 1 Triple Head Adapter. 1 separator 3/3" to 4-1/4". 2 extension rods: 1" x 4" & 1" x 2".
BrandAuto Tools Direct
ManufacturerAuto Tools direct
Part NumberAU174

2. Sealey

25 Pieces, Sealey PS982 Hydraulic Puller Set

Sealey - Width: 502mm. 10tonne hydraulic ram compatible with other sets in the range. Contents: 10 tonne hydraulic ram, twin head, 100mm leg x3, extension rod; 25 x 50mm x1, 200mm leg x3, triple head, Ram Service Kit, Beam, Separator 75-105mm, bolt 5/8", 150mm leg x3, main rod; 200mm x4, 25 x 100mm x1, Ram Nut. Height: 122mm. Length: 398mm.
BrandSealey
ManufacturerSealey
Height12.2 cm (4.8 Inches)
Length39.8 cm (15.67 Inches)
Weight16.43 kg (36.22 Pounds)
Width50.2 cm (19.76 Inches)
Part NumberPS982
ModelPS982

3. Sealey

Sealey PS980 Hydraulic Bearing Separator/Puller Set, 66mm x 466mm x 223mm, 8 Pieces

Sealey - Supplied with 75-105mm bearing separator. Contents: 10 tonne hydraulic ram, extension Rod 200mm x4, Bolt 5/8", separator 75-105mm, Cross Beam. Maximum puller depth 420mm. Height: 223mm.
BrandSealey
ManufacturerSealey
Height22.3 cm (8.78 Inches)
Length6.6 cm (2.6 Inches)
Weight9.23 kg (20.34 Pounds)
Width46.6 cm (18.35 Inches)
Part NumberPS980
ModelPS980

4. maXpeedingrods

MaXpeedingrods 23pcs 10 Ton Hydraulic Puller Set Separator Hub Gear Bearing Sets Tool Kit

maXpeedingrods - Package include: 1 x Ø 75 - 105 mm bearing separator, 1 x beam, 3 x 6” leg puller, 1 x Centre adapter1 x Triple head, 3 x 4” leg puller, 1 x Twin head, 3 x 8” leg puller. Professional installation is highly recommended No Instruction Included. For any needs please contact us. Package included: 1 x rampart, 4 x 8" extension rod, 1 x 2" extension rod, 1 x 4" extension rod, 1 x 10-tonne hydraulic ram, 3 x Screw.
BrandmaXpeedingrods
ManufacturermaXpeedingrods
Part NumberZQ54MS

5. mewmewcat

Mewmewcat Hydraulic Wheel Hub Puller with Hammer Set in a Molded Case 10 Ton

mewmewcat - The hydraulic spindle is adequate to meet the requirements for vehicle rescue. Displayed in a blow molded case. With a maximum capacity of 10 ton. Included 3 pullers/ hammers: hydraulic spindle, screw, impact hammer. Suitable for vw, opel, fiat, seat, audi, Skoda, Volvo, citroen, Peugeot, renault, etc Highest quality design for long life in daily workshop use.
Brandmewmewcat
Manufacturermewmewcat
Part NumberQNA1298132636615AB

6. BGS

BGS 7729 | Hydraulic Puller Set | 10 t | 25 pcs.

BGS - Tension bolt distance C in mm: 111 mm. 14 mm / max. Tension bolt thread D: 5/8 inch x 18 UNF. One head piece for 2-arm and 3-arm pullers. Span a min. In mm: min. 3 puller arms each in 100, 150 and 200 mm length. 64 mm / max. Puller pin spacing e min. Puller bolt mounting thread B: 5/8 inch x 18 UNF. In mm: min. Max. 2 extensions. 210 mm. Max. Hydraulic spindle 10 tonnes. Extraction width: 240 mm at 100 mm puller arm length, 280 mm at 150 mm puller arm length, 300 mm at 200 mm extraction arm length. 62 mm. Max.
BrandBGS
ManufacturerBGS technic
Height0.13 cm (0.05 Inches)
Length0.02 cm (0.01 Inches)
Weight12.95 kg (28.55 Pounds)
Width0.06 cm (0.02 Inches)
Part Number7729
Model7729

7. AB Tools-Toolzone

AB Tools-Toolzone Hydraulic 10 Ton Ram Rod Gear Hub Puller Separators Set TE059

AB Tools-Toolzone - Suitable for pulling hub, flanges, gears and bearings. Diameter: 40mm. Screw mechanism converts power to 12 ton ram head. Length: 190mm. For use with ball joint separator.
BrandAB Tools-Toolzone
ManufacturerAB Tools-Toolzone
Height5 cm (1.97 Inches)
Length28 cm (11.02 Inches)
Weight1.4 kg (3.09 Pounds)
Width13 cm (5.12 Inches)
Part NumberTE059